Tuesday, November 27, 2012

How to Grind and Finish Stainless Steel with an AA Abrasives Dimple Wheel


AA Abrasives presents the Dimple Wheel. 

Grinding Wheel - The Dimple Wheel -AA Abrasives 40707
AA Abrasives AA-Flex Wheel aka The Dimple Wheel

The Dimple Wheel allows for one step grinding and finishing. These abrasive wheels are also known as the AA-Flex Wheel. They are constructed of aluminum oxide grains bonded to a strong, slightly flexible fiberglass reinforcing and have "dimples" on the grinding surface. AA-Flex wheels will remove stock much like a resin bond depressed center wheel and finish like a resin fiber disc. These flexible abrasive wheels are excellent for use on stainless steel and aluminum.



The Dimple Wheel is demonstrated here in a metal fabricating shop. The “Dimple” Wheel is used to grind and finish the surface of a stainless steel railing. The dimple wheel is used to create a smooth, uniform finish on stainless steel. This is a 4-1/2 x 1/8 x 7/8- A - Medium -Type 27 disc. The Dimple Wheel is used on a Metabo W8-115 angle grinder. 

Click here to view our full line of Dimple Wheels  - grinding and finishing in one step.

For additional technical information or information on any abrasive products, visit our website at aaabrasives.com or
Call 800-888-1802 to speak to an abrasives specialist at AA Abrasives.



Friday, November 2, 2012

Use Surface Conditioning Disc for Blending Surface Scratches on Stainless Steel


Abrasives-Sandpaper topic today is the use of surface conditioning discs and nylon hand pads to blend surface scratches on metal. We have outlined hand and machine processes and the abrasive products, power tools and abrasives commonly used in the blending of surface scratches. 




Abrasives-Sandpaper blog is on location in a metal fabricating shop - blending surface scratches to create a uniform finish on stainless steel. To start – this is a Metabo W8-115 angle grinder with a rubber back up pad 00059 and disc nut 00079 with the fine maroon hook and loop surface conditioning disc 33416.  Hand finishing follows with the fine maroon hand pad 30059

For deeper scratches several grits of nylon hand pads may be used in a step down process following the power tool blending with the surface-conditioning disc. This process can include the coarse tan hand pad 30080 then the medium gray hand pad 30074 and finally the fine maroon hand pad 30059

View our line of hand pads and surface conditioning discs for the industrial abrasive products to best meet your specifications.
Click here – 6 x 9 hand padssurface conditioning discs – to view the full product line.


surface conditioning discs
Surface Conditioning Discs



Stainless steel is a ferrous metal.  Mechanically polished and brushed finishes are achieved with the use of abrasive materials.  A wide range of finishes can be achieved depending upon the original grade of stainless steel as well as the type and texture of abrasive belts or abrasive discs used and the nature of the polishing technique.   Stainless steel finishes range from a mirrored finish to a #4 brushed stainless finish to a satin finish.  The most common finish used by appliance manufacturers is the #4 brushed stainless finish. Light surfaces scratches can be repaired to create a uniform finish on a brushed stainless steel appliance. Maroon and grey non-metallic hand pads can be used. You will want to use a block to create a uniform finish. Using your hand can cause streaking from the varied pressure of your fingers. It is very important to follow the direction of the grain in long even strokes in one direction only. If you “turn” at the ends you will create swirls.


These methods cannot be used on polished or mirror finished stainless steel or on stainless steel with a clearcoat finish also known as “smudge free”-“satina” or other names.

Remember – Always follow the grain on metals and know the surface you are working with!


For additional technical information or information on surface conditioning abrasive products, visit our website at aaabrasives.com or
Call 800-888-1802 to speak to an abrasives specialist at AA Abrasives.